Furuno 711C Navpilot head & MCU002 remote keypad, TZT style

Ben Ellison

Ben Ellison

Panbo editor, publisher & chief bottlewasher from 4/2005 until 8/2018, and now excited to have Ben Stein as very able publisher, webmaster, and editing colleague. Panbo is going to the next level in 2019 and beyond.

10 Responses

  1. While I’d like to try the Furuno remote keypad, it’s interesting how much easier touch commands are now that the TZT 14 is mounted less vertically. And I’m having the converse experience with the Raymarine a-7 at the lower helm. It’s harder to use now that it’s lower and more vertical. Ergonomics really count. Latest installs here: http://goo.gl/3DACvn

  2. So today I learned that FurunoUSA will be introducing the 1st Watch WiFi Radar here fairly soon:
    http://www.furuno.com/special/en/wireless/radar/
    I still “get” the product myself, so I’ll be very interested to see how they pitch it. Meanwhile, Mark at i-Marine is excited:
    http://i-marineapps.blogspot.com/2014/06/furuno-1st-watch-marine-radar-app.html
    …but feelings are mixed over on the CruisersForum:
    http://www.cruisersforum.com/forums/f13/any-experience-with-wireless-radar-127562.html
    I have figured that the DRS4W is NOT simply a DRS4D with WiFi in it. For thing, it’s only 19-inch, like the DRS2D, and if it has DRSxD advanced features like ARPA, multi-speed rotation, dual range, true motion etc. Furuno isn’t saying yet.

  3. Rick R says:

    A big step foreword, and another nail in the coffin of old style (and expensive) MFD’s.
    However I am puzzled by why is the output limited to only two devices. Without this restriction, radar signals from a vessel equipped with a DRS4W could be transmitted to nearby boats, using a signal booster if necessary. Just think of the possibilities for collision avoidance, and as an alternative to AIS.

  4. Johan says:

    A short answer to Ben’s request for NavPilot user testimonials:
    I’ve been using the NavPilot 711 on my 30-foot semidisplacement motor cruiser since 2010. It’s connected to a GP-33 GPS and a PG-700 heading/rate sensor, both via NMEA2000. Route info is fed from Transas Navigator via an Actisense NGW-1-USB gateway.
    I have only praise för the NavPilot, especially after the latest software update, which I got installed this spring. It keeps the course within one or two degrees at all times in Auto mode. In nav mode it follows the route from Transas so closely that I’ve been able to let it steer “hands off” even when passing under bridges and between islands in the inner parts of the Stockholm archipleago. Not really how you’re supposed to use it, but it was fun!
    Installation was straightforward, and the system didn’t need any extensive calibration. Just let it do its dockside and trial run tests, let the compass do a few turns to deviate itself, and off you go!
    If there are any questions, I’ll be happy to answer them.

  5. George says:

    Perhaps a silly question, but how do you put the unit into standby mode? I see it on the remote but what about the head unit? Does it have the Garmin feature of going into standby when you touch the wheel?
    This should be obvious so when you are leaping from the helm to grab the wheel in an emergency, you don’t have to think. I like my old simrad unit with a simple button but someday I will want to upgrade it.

  6. Johan says:

    George,
    on my head unit (the old B/W FAP-7011), the power/stby button is bright blue and clearly labelled.
    I made some quick research regarding the new FAP-7011C, and the standby mode is still activated by pressing the power button momentarily, but there are no markings to indicate this. You make a good point; it should be obvious how to go into standby mode. It should not be necessary to read the manual.
    There is no automatic standby function in the NavPilot like Garmin’s “Shadow Drive”. The autopilot will counteract your steering input if the wheel is turned when in auto or nav mode. However, it’s possible to dodge obstacles by using the “left” and “right” buttons.

  7. Thanks, Johan, but actually Furuno is the only manufacturer I know of that offers an automatic standby (and resume course) autopilot feature like Garmin’s ShadowDrive. Furuno calls it Safe Helm and it requires an accessory valve block and Furuno (Accusteer) hydraulic pump. The Garmin feature is also hydraulic steering only, but comes with the AP, I think. Then again, the Furuno system can also provide Power Assist Mode power steering and is highly adjustable. More info:
    http://www.furunousa.com/products/ProductDetail.aspx?product=FPS8
    http://www.panbo.com/archives/2013/03/furuno_at_mibs_2013_chirp_fcv587627_and_navpilot_fps8.html

  8. Richard C says:

    Johan, I’m considering getting the Furuno NAVpilot 711 for a 40′ sailboat and was wondering what your experience has been following a route with a strong cross current or crosswind. Will the NAVpilot continue to correct and stay on the route line with accuracy? Thanks.

  9. Johan says:

    Richard,
    I’m very satisfied with the 711’s performance in cross winds. Most of the time, it keeps the boat so close to the route that I can’t see the offset on my 15″ nav screen at any realistic zoom level.
    When following a route in Nav mode, naturally there will be an XTE value which makes the job easier for the autopilot, but there’s also the “Advanced Auto” mode for course following mentioned in Ben’s post. It sets up a distant waypoint internally in the autopilot, and then steers towards this waypoint. Thus, both Nav mode and Advanced Auto mode will actually make use of XTE to compensate for any drift. I have both COG and heading vectors in my nav system, and it very clearly shows the compensation in heavy crosswinds, with the boat “crabbing” along sideways! 😉
    Obviously, your 40-foot sailboat won’t behave exactly as my 30-foot motor boat, and we don’t really have any currents to speak of in the Stockholm archipelago, but from my experience I can absolutely recommend the 711.
    Also, Ben;
    thanks for enlightening me about the Safe Helm feature! It was not avaliable when I bought the Navpilot 711 in 2010 (quite early in the product life cycle, I believe), but it’s nice to know that the possibilites keep expanding!

  10. Richard C says:

    This may be a question that can’t be answered at this time, however, I think it might contribute some feedback to system planners at Furuno.
    When will the 700 autopilot control head switch over to a color display like the 711C?
    The reason I ask – Although I think the 711C is a blockbuster improvement over the previous monochrome display There is a serious need for the large format 700 with dedicated input for clearly labeled, Standby, Menu and Brill/Power buttons and a color display. When I sail, I often have crew unfamiliar with the electronics especially the autopilot. When the controls are well labeled with dedicated functions and do not require searching through a menu the crew can pick up on the procedures for using the autopilot quickly. Once I start to explain menu stuff I can see their eyes glaze over.
    As a consumer, if I install the 700 which solves the problem I mention above I feel as if I’m buying Furuno’s Autopilot orphan child – forgotten and neglected as color displays are handed out 🙁
    There is one other feature the 700 should have that no other Autopilot control has, (as far as I know), and that is an ambient light sensor so the screen will adjust the brilliance when the sun sets or rises in the morning. If Furuno wants to lead the Autopilot market this would be unique. I would pay more to have this feature, it’s that important.

Join the conversation

Your email address will not be published.