Forum

Welcome to the Panbo Marine Technology Forums.

Ben Stein
Ben Stein
@ben-stein
Admin
Estimable Member
Joined: February 21, 2018 12:47 pm
Last seen: March 27, 2024 9:02 pm
Topics: 20 / Replies: 136
Reply
RE: Epoch 460 battery

I think this is a fine place for it and comes with the benefit of pagination on posts. Makes reading a lot easier. -Ben S.

2 weeks ago
Reply
RE: Tablet for aquamaps

Bryan, The tablet I mentioned is the Orca Display 2 --Note that this tablet is specifically designed to work with Orca's app and Core. But, it's...

3 weeks ago
Reply
RE: Connecting a Raymarine Autopilot system to a Garmin NMEA 2000 instrument system

I believe you will find that the answer to question number one is yes, the Raymarine AP shouldn't have any troubles reading wind information from a B&...

4 months ago
Reply
RE: Can't make my Yacht Devices engine gateway see my Volvo Penta D12s

We were able to get Jeff's troubles sorted out by reconfiguring the connection on the YDEG. From about 2005-2008 Volvo changed the pinout on D6 connec...

4 months ago
Reply
RE: Can't make my Yacht Devices engine gateway see my Volvo Penta D12s

Hi Chris, Can you send an email to [email protected] with your engine serial numbers? Also, if you could either include pictures of whe...

8 months ago
Reply
RE: RAYMARINE TO GARMIN AIS INTERFACE

Hi Tim, Do you know the model of Raymarine AIS you have? I think all Raymarine AIS units have been equipped with a SeaTalk NG interface. Assumin...

10 months ago
Reply
RE: Rd418d radar cable to mfd

I found this Raymarine forum post with the pinout for Raynet cables:/p> I think that should give you what you need to get going on testing. ...

10 months ago
Reply
RE: Integrating Fusion audio with Raymarine Classic

@wkearney99 I think you're right. I just double checked the E-Classic user guide and it only mentions Sirius audio control. I don't think the timing w...

11 months ago
Reply
RE: Interface for volvo tamd 63p-a engine to display engine indications on mfd

@blurt My apologies, I'd made a mistake in posting the 63P had a J1708 interface. I've corrected that above. You're correct that the 63P doesn't have ...

1 year ago
Reply
RE: Actisense NGT-1 data simulation app

Bruce, it doesn't use an NGT-1, but I run lots of data on test benches. Instead of simulated data, I use real data I've previously recorded. I use a Y...

1 year ago
Reply
RE: Connecting an older Simrad AP 22 Autopilot to Garmin 8616 XSV chartplotter

@rkstump51, when you say steer the boat, can you elaborate a little more? Even with no integration between the autopilot and MFD you will get heading ...

2 years ago
Reply
RE: Interface for volvo tamd 63p-a engine to display engine indications on mfd

Hi Dan, The TAMD-63P uses J1708 to communicate engine data. You can use a Yacht Devices YDES-04N () to convert from J1708 to NMEA 2000. But, be ...

2 years ago
Reply
RE: Electromaax smart voltage regulator

It's an interesting product. Right now I don't have very good ways of testing alternators and regulators. I'm working on it and will definitely keep t...

2 years ago
Reply
RE: Yacht Devices J1708 Engine Gateway For 2000 Volvo TAMD74

Hi Geno, First, it's not possible to leverage the e125's internal WiFi to receive NMEA 2000 data. That's a limitation of the e125 (and most othe...

2 years ago
Reply
RE: Shakespeare Webwhip

Hi Angelique and James, When you're connected to the WW directly, can you look at network preferences on your Mac? I'm hoping you can tell me th...

2 years ago
Page 1 / 11