Panbo

Panbo Forum Home »
Andrew

Andrew

  • Commented on Autohelm 5000+ to nmea 2000
    So I phoned Raymarine and they claim that I need to use an older ST6002 display combined with my original ST5000+ display. I don't understand why if I keep the ST5000+ display and use the seatalkNG converter that the ST70...
  • Commented on Autohelm 5000+ to nmea 2000
    Ok so I found the seatalk to seatalkNG converter and gather that I will need this to get the autohelm on my nmea 2000 backbone. If that works will a ST70 autohelm display be able to control the 5000+ autohelm?...
  • Posted Autohelm 5000+ to nmea 2000 to Panbo Forum
    I have an autohelm 5000+ that I would like to interface to my nmea 2000 backbone. I am trying to figure out how to do this. Is it just a matter of cabling or do I need an interface? I...
  • Commented on Lowrance LMF-400 or 200 Multi Function Guages
    I have a LMF-400 installed on my boat and use it for a dedicated depth and speed display. It works fine for that purpose. It isn't very flexible in display options though and doesn't appear to have options to display...
  • Commented on Maretron DST100 on LMS-525c NMEA2k buss
    Stenn, As Ben mentioned, the problems you are experiencing sounds like the same problems I am having with my 5300. I can get other info from the DST100 but not depth. Let us know what you find out....
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    Well I got back to the boat after a long winter and installed the latest firmware for my GlobalMap5300 that I hoped would solve my problems. No change. I still can't get depth information from my DST100. I can get...
  • Commented on Best N2k to USB gateway: Thoughts?
    I was also looking at the Actisense's NGT-1. It appears to be a promising unit if it can indeed put data from old 0183 instruments onto the NMEA2000 bus. This would also allow hobbyists to build a 0183 sensor and...
  • Commented on Best N2k to USB gateway: Thoughts?
    I was also looking at the Actisense's NGT-1. It appears to be a promising unit if it can indeed put data from old 0183 instruments onto the NMEA2000 bus. This would also allow hobbyists to build a 0183 sensor and...
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    Well, I'm glad to hear that the LMF400 shows the depth info. I checked back on the Lowrance downloads page and low and behold they have posted a new update since I last spoke with support in the fall. The...
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    Well, I'm glad to hear that the LMF400 shows the depth info. I checked back on the Lowrance downloads page and low and behold they have posted a new update since I last spoke with support in the fall. The...
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    That would be great. Thanks Ben....
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    That would be great. Thanks Ben....
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    Ben, Thank you for your response. Your thinking seems much in line with what I have suspected. I thought it should be pretty simple. The depth instrument should send the standard PGN out on the bus and the display should...
  • Commented on Need help with Lowrance Glabal Map 5300 and Maretron DST100
    Ben, Thank you for your response. Your thinking seems much in line with what I have suspected. I thought it should be pretty simple. The depth instrument should send the standard PGN out on the bus and the display should...
  • Posted Need help with Lowrance Glabal Map 5300 and Maretron DST100 to Panbo Forum
    In a failed effort to add depth information to my Lowrance 5300 chartplotter I purchased and installed a Maretron DST100. I have powered the NMEA2000 bus and set up the backbone etc. From the Lowrance display I can see the...
  • Posted Need help with Lowrance Glabal Map 5300 and Maretron DST100 to Clone of Panbo Forum
    In a failed effort to add depth information to my Lowrance 5300 chartplotter I purchased and installed a Maretron DST100. I have powered the NMEA2000 bus and set up the backbone etc. From the Lowrance display I can see the...
Subscribe to feed Recent Actions from Andrew