Knut

Knut

  • Posted NMEA 2000 Backbone SeatalkNG and other cabling to Panbo Forum
    If you want to use Ramarine SeatalkNG in combination with equipment from other manufacturers using what Raymarine call Devicenet. Is i possible to build a backbone where one end is SeatalkNG (5 Way Connector, Backbone Terminator) the other end is...
  • Commented on NMEA 2000 & Actisense
    Can't understand why there should be any limitations.. Found this in the FAQ section, should answer your question http://www.actisense.com/products/nmea-2000/emu1/faqs-emu1.html Q: How many engines can a single EMU-1 support? A: In the future, two engine instances will be supported by a...
  • Commented on NMEA 2000 & Actisense
    Which one? Don't think it should be any limitations Have read this page? http://www.actisense.com/products/nmea-2000/ngw1/ngw-1overview18.html...
  • Commented on New MMSI numbering scheme for handheld VHF with DSC and GPS
    As Henning wrote it should not be difficult to program a radio to ignore it's own MMSI. But it would be more of a challenge with three sets using the same MMSI? So having the possibility to get more than...
  • Commented on AIS over NMEA 2000, the shame sheet!
    Yes the em-trak is running v1.7...
  • Commented on New MMSI numbering scheme for handheld VHF with DSC and GPS
    After registering the boat in "Norwegian Ordinary Ship registry" you get assigned a call sign. Then you go to http://www.maritimradio.no/index.php?page_id=23 and apply for a license, with the license you get the MMSI number. For pleasure crafts the cost is NOK...
  • Commented on Upgrading Furuno NN3D with SSD disk?
    Update: The Furuno NN3D MFD8 uses a ide disk, no room to add a sata to ide adapter....
  • Posted Bad N2K data from em-trak B100 to Panbo Forum
    I have a em-trak B100 AIS transponder, this has got two NMEA 0183 ports (high/low speed) and one N2K port, After applying the latest sw upgrade this transponder can share it's GPS data on the N2K netweork, My Raymarine i70...
  • Commented on New MMSI numbering scheme for handheld VHF with DSC and GPS
    Here in Norway the new scheme will be effective from January 1th 2013. Existing sets will not need to be reprogrammed....
  • Posted New MMSI numbering scheme for handheld VHF with DSC and GPS to Panbo Forum
    he International Telecommunications Union (ITU) has decided to recommend a new scheme for MMSI numbers on handheld VHF sets with DSC and GPS, Recommendation ITU-R M.585-5 on the Assignment and use of 9-digit numerical identities in the maritime mobile service....
  • Posted Upgrading Furuno NN3D with SSD disk? to Panbo Forum
    I have an early modell of Furuno NN3D MFD8, the existing HD is to small. Furuno Norway decided to supply high definition pictures for overlay - with all the pictures on the hard drive I had not place for another...
  • Commented on AIS over NMEA 2000, the shame sheet!
    Thank you. There is probably hope for a new SW from Raymarine since this is new devices.. Only problem is that there are no Raymarine plotters in my network - so updating will require some work. I'm not that optimistic...
  • Commented on AIS over NMEA 2000, the shame sheet!
    I installed a Furuno NN3D MFD8 when this modell was brand new. This year i decided to upgrade with -AIS Class B Transceiver em-trak B100 -New instruments Raymarine i70 Heading data come from a NMEA 0183 heding sensor connected to...
  • Commented on Arghhhhh... Radar Overlay.......
    Here is what Furuno says on this subject (source http://www.furunousa.com/ProductDocuments/NN3D%20FAQ%20April09.pdf ) Q4.DRS Is GPS COG information allowed for Heading and ARPA capability? No, while some competitor’s radar systems allow GPS COG for Heading and ARPA functionality, Furuno believes that this...
Subscribe to feed Recent Actions from Knut