METS 2012 show report part 2: NMEA 2000 related

mets2012_maretron_1.jpg

In part 2 I’d like to talk about the items related to NMEA 2000 in some form or fashion. Actually it’s becoming hard to find a new marine electronics product that does not have an N2K interface! From batteries to sensors, they all seem to grow a NMEA 2000 interface. Lets start off with the better known specialists first. Maretron had a lot of gear that I hadn’t seen before like a very new 3.5″ color display, unnamed as of yet, that is essentially a smaller version of the DSM 250. Not only does this fit in better with the 110 mm displays from other manufacturers, I thought the screen actually looked better as well because it has the same amount of pixels at higher DPI. Thus it gets rid of the slightly grainy display that I felt let the DSM 250 down. It probably also uses less power too…



If you like a big, high res display Maretron now also has new outdoor versions of the DSM 800 in the TSM 800 (8″) and TSM 1330 (13.3″) vessel monitoring displays running N2Kview. Note that although these devices are nominally generic computers they are dedicated N2Kview displays. 

mets2012_maretron_4.jpg

Maretron’s VP of engineering, Frank Emnett, also gave me a demo of the Windows software they are developing that accompanies their VDR100 vessel data recorder. Like flight data recorders it is colored orange so that the box and data can be retrieved after an accident. We agreed that this wasn’t the most likely use though — this product is very much oriented towards charter operators or other fleet owners that want to be able to see what has happened in the boat. Frank gave an example of a charter operator that found out that its customers were siphoning off fuel, and that could now prove this because the VDR100 showed they hadn’t been using the engine as much as they said.

mets2012_maretron_7.jpg



Actisense

Actisense announced that the EMU-1 engine monitoring unit will be ready soon. The hardware has been ready for a while, but apparently they got stuck with trying to put too much functionality into the microcontroller that they were trying to use for this, and have now upgraded to a newer chip that will allow them to speed up development. Let’s hope they do, because what I heard regarding their solution to calibration sounded quite useful.

mets2012_emu1.jpg

As an engine monitor measures analog values or speed pulses it needs to translate these into digital values that can then be shown on our displays. But who knows how many pulses of a sensor form one rotation of the engine? Maretron “solved” this by limiting their EMS100 to a number of Yanmar engine ranges. Noland “solved” this by letting the customer figure it out. Actisense proposes to build an online database, and will supply programming software that will use that data to program your onboard recorder. Maybe they could also use crowd sourcing whereby a user who has an engine that is not in the database yet can easily upload this data into the database? They also announced an end-user price of GBP 295, with international pricing to be determined still.



Offshore Systems (UK)

Ben wrote about Offshore Systems (UK) no longer being just about N2K tank sensors last May, but still I was amazed how much their product range has grown. They seem to be developing a large number of products that are catered to the boat builder, like a NMEA 2000 to MODBUS interface which makes navigation and sensor data available to PLCs, a J1939 interface and a DC switch input module. The fact that most of these are meant to be 35 mm DIN rail mounted also points towards the professional market. 

Vesper Marine

Another promotor of AIS and NMEA 2000, and thus very much in my favour is Vesper marine. Last year they showed the Watchmate Vision, an AIS collision avoidance screen with a color touch screen, and a AIS transponder with WiFi built in. As usual with these things it has taken a while for them to get these products to the stage where they are now ready for sale. The Vision is now FCC and NMEA 2000 certified, and can be released for worldwide sales. The production run has started and they should be shipping before the end of the year, so if this is what you have been waiting for this could be a great Christmas gift! The list price is $ 1249, so I imagine not everyone will find one in their stockings!



The XB8000 AIS transponder with WiFi is the ‘headless’ version of the Vision. The XB8000 is also FCC and NMEA 2000 certified, has been shipping for a while at a list price of $ 799 USD. The most interesting features of these devices, and at the moment the most unique, is the flexibility and functionality that Vesper puts into the WiFi Ethernet connection. These can be configured to set up their own WiFi network, allowing PCs and tablets access to the AIS data. If you already have a wireless router on board they are just as happy to join that network and send the AIS data out on the existing network. Furthermore, they are also capable of translating NMEA 0183 to and from NMEA 2000. The specific PGNs supported for this is growing via software updates. This means that you can do not need any WiFi transmitters other than this, and your tablet applications such as iNavX will happily show sensor data translated by the Vesper device. That data can arrive at the Vesper over the NMEA 2000 interface or directly from its NMEA 0183 input.

As usual the Vesper marine products seem very well thought out and they seem to be continuously coming up with better solutions. Bravo!

Victron

The power company with the telltale “blue” color scheme had a number of novelties to show. There was the world premiere of a new Blue Power IP67 battery charger that is completely sealed thus making it more robust and easier to install. As a gimmick they had frozen it into a large block of ice, but I did not attend the party where it was supposed to be dug out and then started up! These will be available in 12V with 17A and 25A capacity and 24V with 8A and 12A, and look like excellent chargers for smaller boats.



mets2012_victron_4.jpg

They also showed off Lithium batteries in two sizes, smaller 12V / 90 Ah and bigger 24V / 180 Ah. As with Mastervolt you can’t just buy the batteries but you need to obtain a complete system that makes sure that the batteries are not overcharged or discharged too far.

mets2012_victron_1.jpg

As a last note I’d like to point out that Victron seems to be moving over to using standard NMEA 2000. The newer products use NMEA 2000 / CANbus directly whilst there are interfaces to the older VE.Net CAN devices, as documented here.



Mastervolt

I already talked about the new Qbox in METS part 1, but Mastervolt had two other things that interested me. First is a refresh of their Lithium batteries. Version 2, called the “Ultimate”, has an improved battery management system mounted onto the battery itself. It is also mounted in such a way that it becomes easier to install these batteries on their side, and the BMS is now IP rated against water ingress. The final classification is not known yet, but the idea is that you can mount these in sloppy bilges.

mets2012_mastervolt_1.jpg

The other development is something that I’ve known about for a while since I’m supposed to get one Real Soon Now, and that is the successor to the Alpha Pro charge regulator. This will have a MasterBus interface, making installation easier especially if you use the Lithium batteries, as the “Stop Charging” message coming from the battery can now be processed directly by the charge regulator instead of requiring an extra interface box.

With regard to networking it looks as if Mastervolt is sticking with their private CANbus named MasterBus, with explicit interfaces to NMEA 2000 and to/from Czone, although the latter interface is still not on the BEP or Mastervolt websites. A good subject for a future post!

LCJ capteurs

At METS for the first time, LCJ Capteurs is a French company that specializes in measuring wind using ultrasonic waves. They have been doing this since 1999, and are now ready to move into the marine electronics world on their own. Previously they focused on the French market, and mostly did their international business as an OEM producing devices for other companies. Under new management they plan to expand internationally in 2013 including the USA.

Their CV7 wind sensor has improved directional accuracy, 2 degrees instead of 10, over the OEM product sold elsewhere. They also have a racing version, the CV7C that has a higher data rate for racing purposes. And completely new is a conversion box that converts the NMEA 0183 stream produced by the sensor into NMEA 2000. 

mets2012_lcj_1.jpg

14 Responses

  1. Anonymous says:

    In the Victron piece the writer talks about all the additional equipement that should be needed when you use Mastervolt Li-ion batteries. The writer only make a mistake in comparing this smal Victron Li-ion starter batteries with the innovative Mastervolt deep cylce Li-ion with integrated battery management. With the new Mastervolt Li-ion generation you even need less additional equipement because this is the only battery in the world with integrated BMS, Shunt and potential free contact.
    With the Victron Li-ion there comes a big external Battery management System.

  2. Ben Ellison Ben Ellison says:

    I’d like to remind all Panbo readers who are in the trade of this commenting policy:
    “It’s fine for manufacturers to comment on entries about their own or other products, but please state your affiliation, even if you don’t use your name.”
    I should have the entire commenting policy posted somewhere besides an old entry — http://goo.gl/tGKK9 — but they are sort of obvious I think.

  3. Hello,
    thanks for all the info and the nice post. One comment from me about the last line about our products:
    “As a last note I’d like to point out that Victron seems to be moving over to using standard NMEA 2000. The newer products use NMEA 2000 / CANbus directly whilst there are interfaces to the older VE.Net CAN devices, as documented here.”.
    We are indeed moving over to NMEA2000 completely. The only thing is that, as our products are also sold a lot outside of the marine environment, we have decided to stick to the RJ-45 plugs for cost reasons. We supply dropcables to the waterproof Micro-C connector system. This NMEA2000 with a different connector is what we call VE.Can.

  4. Hendrik says:

    Kees, thanks again to be my eyes and ears on Mets
    Hendrik

  5. Nick says:

    The 3.5″ Maretron display looks suspiciously like an off the shelf industrial display used elsewhere …

  6. Ben Ellison Ben Ellison says:

    Yes, I think the display hardware may be a Teleflex CANtrack — http://goo.gl/rRrnp — also used by Offshore Systems and other manufacturers. Maretron has plenty to do without developing displays from scratch, and hopefully there’s a saving that passes to customers.

  7. Dave says:

    The 3.5 Maretron, is the Cantronik ( ex Teleflex) display unit, thats available as an OEM unit. Its nice, but needs good display software to even come close to displays like teh GMI 10 or Rays i70 etc. Its ARM based running Linux ( in some versions)

  8. Ben Ellison Ben Ellison says:

    Yup, the Cantroniks look very similar: http://goo.gl/JVxgx
    The Garmin GMI10 and Raymarine i70 are great NMEA 2000 displays, especially when networked with sensors and MFDs from the same respective manufacturers. But Maretron software can do things the others can’t — like show the output of two depth sensors at once, http://goo.gl/Jbq1o — and that’s especially true when networked with Maretron’s unique family of sensors.

  9. It’s a pitty I haven’t made any photo on NMEA Connect fest taking place in one of meeting rooms on Amsterdam RAI during METS. This was quite interesting gathering of companies and equipmenet connected on NMEA2000 …

  10. arno says:

    I did find on the site of LCJ Capteurs that there is rotating mast compensator for N2K. I think they are the first.
    http://www.lcjcapteurs.com/product/cv7/?lang=en
    see options

  11. Kees says:

    Hi Arno,
    I forgot to write about the rotating mast function for the LCJ wind sensor. The proprietor of LCJ that I spoke to said it would be available soon, but that they were still working on some details.

  12. arno says:

    Hi Kees,
    Did you see how they did do the compensation (compass or a mechanical arm)

  13. Kees says:

    Hi Arno,
    No the rotation sensor was not on display, but I was told that it would work using an extra input on the NMEA 2000 interface box.

  14. Hendrik says:

    Actisense EMU-1 is now on the market.
    Got mine yesterday, installed it today.
    Works like a dream

Join the conversation

Your email address will not be published. Required fields are marked *